1) modulus of rigidity,modulus of elasticity in shear,rigidity modulus,modulus of stiffness
刚性模数
2) rigidity
刚性
1.
Analysis of both technical and managerial rigidity of tobacco enterprises;
烟草企业技术刚性和管理刚性成因分析
2.
A Note on Rigidity of Proper Holomorphic Self-mappings;
关于逆紧全纯映射刚性的一个注记
3.
Rigidity of Proper Self-Mapping on Some Kinds of Generalized Hartogs Triangle;
某些类型广义Hartogs三角型的逆紧自映射的刚性
3) Stiffness
刚性
1.
Study of the stiffness for point-reactor neutron-kinetics equation;
点堆中子动力学方程的刚性研究
2.
Testing study on joint stiffness of slender steel frame;
薄柔钢框架节点区刚性试验研究
3.
The properties of high stiffness polypropylene and methods of enhancing its stiffness within reactor were reviewed.
综述了高刚性聚丙烯的性能及反应器内聚丙烯增刚的主要方法,主要从聚合工艺进展、催化剂体系选择、催化剂改性(催化剂预聚改性成核法和聚合改性)和反应器内添加成核剂等方面介绍了反应器内高刚性聚丙烯最新研究进展及其发展前景。
4) rigid
刚性
1.
Classification and principle of rigid waterproofer;
刚性防水材料分类及作用机理
2.
The circinal cavities were found in calcium alginate beads and the cylinder holes were observed in zinc alginate beads from the SEM (micrograph),which indicated that the volume of fraction of zinc alginate polymer was relatively bigger and the zinc alginate polymer chain was more rigid than that of calcium alginate .
凝胶的SEM照片可见,海藻酸钙的冷冻干燥颗粒内为较大的圆孔,海藻酸锌凝胶内为较小的长孔,表明海藻酸锌高分子链在凝胶颗粒中的体积分率相对较大同时刚性较强;卵清蛋白从海藻酸凝胶颗粒中释放的试验结果表明,由于上述海藻酸锌凝胶的特性,导致海藻酸锌对卵清蛋白扩散阻滞作用相对较强;根据试验数据计算得卵清蛋白在海藻酸钙、海藻酸锌凝胶颗粒中的扩散系数分别为1。
5) stiff
刚性
1.
These equations are stiff,but a Gear algorithm can be adapted to it.
该方程组刚性,可采用吉尔算法求解。
2.
The dynamical equations of rigid flexible coupling multibody systems have characters of stiffness and high frequency oscillation.
刚柔耦合多体机械系统动力学微分方程组具有刚性和高频振荡的特点。
3.
Based on the criteria, we define the concept of stiffness of a class of delay differential equations.
据此 ,提出了延时微分方程具有刚性的概念。
6) stiffness
刚性+
参考词条
补充资料：传动：模数
相邻两轮齿同侧齿廓间的齿距t与圆周率π的比值(m＝t/π)﹐以毫米为单位。模数是模数制轮齿的一个最基本参数。模数越大﹐轮齿越高也越厚﹐如果齿轮的齿数一定﹐则轮的径向尺寸也越大。模数系列标準是根据设计﹑製造和检验等要求制订的。对於具有非直齿的齿轮﹐模数有法向模数mn﹑端面模数ms与轴向模数mx的区别﹐它们都是以各自的齿距(法向齿距﹑端面齿距与轴向齿距)与圆周率的比值﹐也都以毫米为单位。对於锥齿轮﹐模数有大端模数me﹑平均模数mm和小端模数m1之分。对於刀具﹐则有相应的刀具模数mo等。标準模数的应用很广。在公制的齿轮传动﹑蜗杆传动﹑同步齿形带传动和棘轮﹑齿轮联轴器﹑花键等零件中﹐标準模数都是一项最基本的参数。它对上述零件的设计﹑製造﹑维修等都起著基本参数的作用(见圆柱齿轮传动﹑蜗杆传动等)。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。