说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 翘曲变形;失稳变形;皱折变形
1)  buckling deformation
翘曲变形;失稳变形;皱折变形
2)  warpage ['wɔ:peidʒ]
翘曲变形
1.
Analysis and optimization for the warpage of injection molding based on MPI;
基于MPI注塑制品的翘曲变形分析及优化
2.
Numerical simulation on the effect of technological parameters on the warpage of plastic thinshelled component;
成形工艺参数对薄壳塑件翘曲变形影响的数值模拟
3.
Effect of injection technological parameters on warpage of plastic thin wall part;
注射工艺参数对薄壳塑件翘曲变形的影响
3)  Warping Deformation
翘曲变形
1.
The stress of base structure is analyzed by 3-D FEM under the action of temperature warping deformation and coupling with vehicular load.
方法结合试验路温度场监测数据,采用三维有限元法对基层结构在温度翘曲变形及与车辆荷载耦合作用下的受力特性进行分析。
4)  warpage deformation
翘曲变形
1.
Simulation on curing warpage deformation of composite T-shaped integrated structure
复合材料T型整体化结构固化翘曲变形模拟
2.
Molflow software was used to analyze the warpage deformation of the injection-molded parts, and mold temperature, melt temperature, injection time and packing pressure were regarded as process parameters.
注塑制品的翘曲变形是一种严重的缺陷,本文提出一个最小化制品翘曲变形的近似优化方法。
3.
The step to analyze warpage deformation by CAE is given with air condition damper vane as example.
用有限元方法研究了温度场、压力场对注塑件残余应力及翘曲变形的影响。
5)  Warp Distortion
翘曲变形
1.
Optimization of Process Parameters of Warp Distortion of Plastics Parts Based on BP Network;
基于BP网络的注塑件翘曲变形工艺参数优化研究
2.
Research on the influence of process parameters on the warp distortion of sintered part in selective laser sintering(SLS);
SLS快速成型技术中激光加工参数对制件翘曲变形的影响
3.
This paper states the factors that can affect medial density fiber-board warp distortion and puts forward relevant countermeasures.
本文论述了影响中密度纤维板翘曲变形的因素,并提出了相关的应对措施。
6)  Warp Deformation
翘曲变形
1.
Not only the optimization technology parameter was gained,but also the quality of injection molding was improved by the integrated analysis of flow simulation, cooling simulation and warp deformation simulation.
应用美国AC—TECH公司的C—MOLD软件对电熨斗后盖注塑充模过程进行了优化分析,通过对流动模拟、冷却模拟、翘曲变形模拟三者结果的综合分析,不仅获得最优化的工艺参数值,而且可进一步改善和提高该注塑件的质量。
2.
This paper introduces the injection molding technology of modified PP plate like article ,discusses that how to reduce the shrinkage depression ,warp deformation ,weld line and other molding defects through the adjustment of injection molding parameters including temperature,pressure and time, as well as improvement of the conditions of mould .
介绍了改性PP板状制品的注射成型技术 ,探讨了如何通过调整注射温度、压力、时间等工艺参数及改善模具条件 ,减少收缩凹陷、翘曲变形、熔接痕等成型缺陷 ,确定了最佳工艺条件 ,取得良好效
补充资料:浪漫曲

浪漫曲是一种无固定形式的抒情短歌或短乐曲。十八世纪后半叶在法国民间、十九世纪中叶在俄国广泛流行。其歌曲的特点为:曲调表情细致,与歌词紧密结合,伴奏亦较丰富;器乐曲旋律富于歌唱性,常由小提琴及管弦乐队演奏。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条