说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 巴氏合金座
1)  babbit seat
巴氏合金座
2)  Babbitt alloy
巴氏合金
1.
The quantitative lead was added into the sample solution to let the concentration come up to be in the interval range suitable for determining by the spectrophotometry of arsenazo Ⅲ, which was used to determine lead in the Babbitt alloy.
采用铅偶氮胂Ⅲ光度法测定巴氏合金中的杂质铅时 ,由于溶液中铅的浓度低于吸光灵敏度最大区间的浓度 ,在溶液中分别加入等量的铅 ,使铅的浓度在吸光灵敏度最大区间浓度范围内 ,然后以光度法测定。
2.
Babbitt alloy is difficult to adapt higher temperature due to its low softening point.
巴氏合金的软化温度低,抗擦伤性能差。
3)  Babbitt [英]['bæbit]  [美]['bæbɪt]
巴氏合金
1.
The thorough analysis was made on adhesive failure and cracking in the surface of Babbitt bush.
利用光学显微镜、扫描电镜和能谱等分析手段,对巴氏合金轴瓦表面多次发生粘结和开裂进行了检验和分析。
2.
The micro-structure and preparing processes of modified Babbitt alloy were designed by axiom de- sign theory.
利用公理设计理论设计改性巴氏合金微结构和制备工艺,测试其热硬度、摩擦系数与磨损量;研究影响巴氏合金耐热性、摩擦与磨损性能的微结构参数。
4)  Babbit Alloy
巴氏合金
1.
A simulative bearing tester was employed to investigate the in situ generation of self-reconditioning layer on worn 45~# steel surface rubbed against Babbit alloy under designed tribological conditions,and its tribological behaviors.
采用模拟轴承试验机,考察在设计的试验条件下金属磨损自修复层在45#钢/巴氏合金摩擦副间的原位生成及其摩擦学性能。
2.
The chemical composition analysis,the metallurgical structure analysis,The XRD analysis and the X-ray energy spectrum analysis were accomplished for the peeled babbit alloy.
对某电厂某机组#1轴瓦发生脱胎的巴氏合金进行了化学成分分析、金相组织分析、XRD分析和X射线能谱分析等测试。
3.
A thrust bearing bush with elastically metallic plastics as a substitute for babbit alloy was used for the structure imrovement in the main motor.
分析了大型立式水泵机组中主电动机推力瓦的性能,以此来阐明江都水利枢纽第四泵站主电动机巴氏合金推力瓦的烧损故障原因。
5)  babbit
巴氏合金
1.
Pouring of the axle tile babbit layer and the craft of processing;
利用车床进行轴瓦巴氏合金层浇注及加工的工艺
2.
The paper analyses influcing babbit joining force factors on problem that babbit often comes unstunk in babbit bearing manuiacture,and proposed improving actions which have led to great improvement.
就巴氏合金轴承在生产制造中经常发生的脱壳问题进行分析,论证了影响巴氏合金结合力的影响因素,提出具体的改进措施,取得明显的效果。
3.
The babbit bearing bush supporting the joint shaft damages frequently.
汽轮机测速机构接长轴,由于长期运行,使其变形、振动较大,支撑接长轴巴氏合金轴瓦经常损坏。
6)  Babbitt metal
巴氏合金
1.
The paper carries on the research proof in view of theflaws by Babbitt metal tradition welding process of the rolling mill three header axle bush,formulates the reasonable welding process finally.
针对轧机三联箱轴瓦巴氏合金传统焊接工艺存在的缺陷进行研究论证,最终制定合理的焊接工艺。
补充资料:巴氏合金
巴氏合金
Babbitt metal

   具有减摩特性的锡基和铅基轴承合金。由美国人巴比特发明而得名。因其呈白色,又称白合金。主要合金成分是锡、铅、锑、铜。锑、铜,用以提高合金强度和硬度。巴氏合金的组织特点是,在软相基体上均匀分布着硬相质点,软相基体使合金具有非常好的嵌藏性、顺应性和抗咬合性,并在磨合后,软基体内凹,硬质点外凸,使滑动面之间形成微小间隙,成为贮油空间和润滑油通道,利于减摩;上凸的硬质点起支承作用,有利于承载。巴氏合金除制造滑动轴承外,因其质地软、强度低,常将其丝或粉喷涂在钢等基体上制成轴瓦使用。巴氏合金分锡基(见锡合金)和铅基合金两种。后者含锑10%~20%,锡5 %~15%,为防止成分偏析和细化晶粒,还常加入少量的砷。铅基合金的强度和硬度比锡基合金低,耐蚀性也差。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条