1)  low carbon pig iron
低碳生铁
2)  low-carbon pig iron
低碳生铁
3)  low carbon
低碳
1.
Rolling technology for rising the elongation of low carbon micro-alloy plate;
提高低碳微合金化中板延伸率的轧制工艺措施
2.
Determination of the Low Carbon and Low Sulfur in the Steel and Iron with the High Frequency Burning-Infrared Absorption Law;
高频燃烧-红外吸收法测定钢铁中低碳低硫
3.
Effect of fused MgO-ZrO_2 eutectic powder on properties of low carbon magnesia-carbon brick;
添加电熔MgO-ZrO_2共晶砂对低碳MgO-C砖性能的影响
4)  lc
低碳
5)  low-carbon
低碳
6)  LC/ULC steel
低碳/超低碳钢
7)  mild steel
低碳钢
1.
Effect of longitudinal magnetic field on microstructure and properties of MIG weld joint of mild steel;
纵向磁场对低碳钢MIG焊焊缝组织及性能的影响
2.
Study of weldability of activating flux for A-TIG welding of mild steel;
低碳钢A-TIG焊活性剂的焊接性研究
3.
Study activating flux for mild steel;
低碳钢A-TIG焊的活性剂研制
8)  Low carbon steel
低碳钢
1.
Dissipative structures of inner cracks in low carbon steel during thermal healing;
低碳钢内裂纹热愈合时的耗散结构
2.
Study on Low Carbon Steel Deoxidized by Magnesium Alloy;
低碳钢镁合金脱氧的研究
3.
Analysis on metallurgical effect of low carbon steel in No.1 top-bottom combined blowing converter in Liangang;
涟钢1号顶底复吹转炉低碳钢冶金效果分析
9)  low-carbon nickel
低碳镍
1.
Research on the welding performance of low-carbon nickel;
低碳镍材料焊接性能的研究
10)  ULC steel
超低碳钢
1.
Inclusions and total oxygen content in ultra-low carbon(ULC) steel were studied for the control of cluster inclusions in ULC steel.
为控制超低碳钢中的簇状夹杂物,对超低碳钢中的夹杂物和与全氧含量的关系进行了研究。
2.
The polarization curve of the ULC steel with titanium and niobium was measured to determine the suitable electrolytic parameters for preparation of TEM carbon replica samples.
测定了一种复合添加钛、铌超低碳钢的极化曲线,选用合适的电流密度和电解时间以碳复型方法萃取钢中的析出相制备透射电镜观察用样品。
3.
Effects of antioxidant additive on carbon pickup of ULC steel from Al_2O_3-C refractory;
以电熔白刚玉和石墨为原料,引入不同的抗氧化剂制备Al2O3-C坩锅,在中频感应炉中研究了含碳耐火材料对超低碳钢钢水的增碳作用。
补充资料：超低碳不锈钢
分子式：
CAS号：

性质：含碳量低于0.03％的不锈钢，一般指奥氏体不锈钢。不锈钢中的碳含量降低到0.03％以下，即超低碳化，能有效地避免不锈钢出现贫铬区和防止晶间腐蚀敏感性。碳在铁素体不锈钢中的危害更加严重，当大约从927℃；以上快冷时就会沿晶界析出铬的碳化物，形成晶界贫铬区，而在腐蚀环境中容易发生晶间腐蚀，为了避免晶间腐蚀就要求碳含量必须低于0.01％。采用氩氧脱碳精炼法和真空氧脱碳精炼法，都能生产超低碳不锈钢。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条