1) even load
均匀载荷，均匀负载
2) uniform load
均匀负荷，均匀[分布]荷载
4) uniform traffic load
均匀负载
1.
5% is obtained under a uniform traffic load.
利用OMNeT++模拟了改进后的32×32Data Vortex网络在均匀负载下的性能,报文平均延迟降低了8。
5) non-uniform loading
非均匀载荷
1.
Non-uniform loading can reduce the collapse resistance of worn casings.
针对非均匀载荷下套管磨损后抗挤强度降低的问题,将磨损简化为套管的壁厚不均度和内壁不圆度几何缺陷。
2.
API casing bulletin gives the formulas and calculations of casing collapsing strength under uniform loading,but the effect of non-uniform loading on casing collapsing strength has been hardly researched.
API套管规范确定了套管在均匀流体静压载荷作用下的抗挤强度计算方法 ,而非均匀载荷对套管抗挤强度的影响几乎没有进行研究或作出规定。
3.
When analyzing the strength of casing in the high-temperature and high-pressure well, the effects of the creep of the casing as well as the non-uniform loading caused by the creep of wall rock are very important.
高温高压井强度分析设计时,围岩蠕变引起的非均匀载荷和套管的长期蠕变等因素对结果的影响很大。
6) non-uniform load
非均匀载荷
1.
Computation of casing strength under non-uniform load;
非均匀载荷下套管强度的计算
2.
Based on the model of the non-uniform load, the paper researched the collapsing strength of the slotted casing with N80 steel and established 3D finite element model by adopting the finite element method.
研究表明,管体抗非均匀载荷的能力远远低于抗均匀载荷的能力,非均匀载荷作用下不均匀系数是影响强度的关键因素。
3.
The N80 perforated casing is studied based on the establishment of the non-uniform load model.
依建立的三维有限元模型及弹塑性理论为基础,借助有限元软件,对射孔管体抗非均匀载荷能力进行了数值模拟。
补充资料：均匀
分布或分配在各部分的数量相同；时间的间隔相等：今年的雨水很～ㄧ钟摆发出～的声音 ㄧ把马料拌得均均匀匀的。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条