1) bar mill
棒磨粉机
2) Rod mill
棒磨机
1.
For the problem of a rod mill being hungry or swell caused by improper feeding,which often exists in the grinding process and thus influences the productive efficiency,based on a T-S fuzzy model with inserted .
针对磨矿过程中棒磨机因给料量不合适而时常出现不饱或胀肚,从而影响生产效率这一问题,应用嵌套式规则的T-S模糊模型,提出了一种棒磨机给料模糊-专家复合优化决策方法。
2.
This paper introduces briefly the sand processing history by both rod mill and vertical axis impact crusher.
立轴冲击式破碎机和棒磨机制砂各自有其固有的优势和弊端,两种机型优化组合后的联合制砂工艺已被大型和特大型水电站工程的施工广泛应用。
3.
Through analysis, illustrates it is the basic reasons of the resultS of rod mills operation conditions optimum seeking tests being unsatisfactory that the taking or abandonment of the test factors and the determination of their levels is incorrect, and there is no essential continuous tests.
通过分析，说明试验因子及其水平选取不当而又缺乏必要的继续试验是棒磨机运行条件优选结果不理想的根本原因，并针对这些原因，相应地提出一些预防措施。
3) machine for grinding and paste
磨粉磨浆机
4) wet rod mill
湿式棒磨机
5) roller mill
磨粉机
1.
Maintenance and protection of roller mill;
辊式磨粉机的维护和保养
2.
Set feeding trajectory and infeeding speed as multiple target functions and take horizontal distance and vertical distance between feeding roller and fast roller, rotational speed and diameter of feeding roller and inclined angle between the fast roller and slow roller as design parameters, Particle Swarm algorithms and MATLAB were used in the optimization design of roller mill.
采用粒子群算法和Matlab语言,以磨粉机的分流辊与快辊的水平距离及垂直距离、分流辊的转速及直径、快慢辊的斜置角度作为设计变量,以物料的喂料轨迹和物料的入磨速度作为多目标函数进行优化设计。
3.
Detailed analysis is made for the feeding non-uniformity phenomena frequently occurred in the feeding system of a break roller mill, and specific settlement methods for them are set forth.
对磨粉机皮磨系统经常出现的几种喂料不匀现象作了详细的分析 ,并提出了具体解决方法。
6) grinding machine
磨粉机
1.
It analyses the working operation of the high-speed grinding machine and the influence of the parameters.
论述了采用高速旋转的超硬轮对物料进行磨损剥离制粉过程，分析了高速砂轮磨粉机工作原理和各参数的影响，为今后进一步研制和开发系列新型高速砂轮磨粉机提供了有用的依据。
2.
With the adoption of pulverization principle of shearing,DG series of double-refiner discs grinding machines were developed.
采用剪切式粉碎原理,开发了DG系列双盘式磨粉机。
3.
With the adoption of pulverization principle of shearing, DG-350 double-refiner disc special type grinding machine is developed to satisfy the requirements of special powder preparation.
为满足特种粉体制备的需要,采用剪切式粉碎原理,研制出DG-35型双磨盘式特种磨粉机。
补充资料：棒磨
分子式：
分子量：
CAS号：
性质：又称棒磨机。磨碎或研碎的一种设备。利用长度略小于磨本身的高碳钢棍棒来研磨物料。工作原理与球磨相像。由于长棒与物料的接触是在一条线上，大粒物料可使小粒物料免受挤压。因此产品比较均匀。适用于粉碎粘胶质的，不适用于粉碎韧性强的固体物料。进料大小不应超过25毫米。原料必须通过电磁离析器等以除去金属硬质物料，以免损伤机件。
分子量：
CAS号：
性质：又称棒磨机。磨碎或研碎的一种设备。利用长度略小于磨本身的高碳钢棍棒来研磨物料。工作原理与球磨相像。由于长棒与物料的接触是在一条线上，大粒物料可使小粒物料免受挤压。因此产品比较均匀。适用于粉碎粘胶质的，不适用于粉碎韧性强的固体物料。进料大小不应超过25毫米。原料必须通过电磁离析器等以除去金属硬质物料，以免损伤机件。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条