2) high pressure sintering
高压烧结
1.
Normal pressure sintering and high pressure sintering of superfine Al_2O_3 powder with high purity;
高纯超细氧化铝粉的常压烧结与高压烧结
2.
Y-ZrO2 toughened SiC bond polycrystalline diamond (PCD) and SisNt bond polycrystalline cubic boron nitride (PCBN) were prepared via high temperature and high pressure sintering.
本文采用高温高压烧结工艺，制备了Y-ZrO_2增韧SiC中介结合的聚晶金刚石(Polycrystalline Diamond，简称PCD)与Y-ZrO_2增韧Si_3N_4中介结合的聚晶立方氮化硼(Polycrystalline Cubic Boron Nitride，简称PCBN)，通过力学实验研究了Y-ZrO_2粉体的制备方法、化学组成及烧结工艺对聚晶超硬材料的断裂韧性、强度及磨耗比等的影响，同时借助于X射线衍射、透射电镜及扫描电镜等方法进行微观结构分析，研究Y-ZrO_2在聚晶超硬材料中的增韧机理。
3) high frequency combustion
高频燃烧
1.
Determination of sulfur content in coal and coke by high frequency combustion-infrared absorption method;
高频燃烧-红外吸收法测定煤及焦炭中硫含量
2.
Determination of carbon in C/C composite by high frequency combustion infrared absorption method;
高频燃烧红外吸收法测定炭/炭复合材料中碳
3.
Determination of sulphur in recarburizer by high frequency combustion infrared absorption method
高频燃烧-红外吸收法测定增碳剂中的硫
4) high temperature sintering
高温烧结
1.
The post-processing of indirect SLS includes debinding, pre-sintering, high temperature sintering and metal infiltration.
间接法选择性激光烧结技术制备金属件的后处理工艺包括脱脂、预烧结、高温烧结以及渗金属。
2.
WC dispersion strengthened copper (DSC) was prepared by mechanical alloying (MA) in combination with high temperature sintering.
利用机械合金化与高温烧结方法制备WC弥散强化铜材料 ,研究了高温烧结温度和烧结时间对复合材料组织和性能的影响。
3.
Formation and influential factors of high temperature sintering in titanium sponge production by magnesium reduction method were analyzed.
论述了镁法海绵钛生产过程中高温烧结的形成及其影响因素,分析了减少高温烧结的控制措施。
6) high-pressure sintering
高压烧结
1.
Pure Al2O3 ceramic and MgO-doped Al2O3 ceramic were prepared by high-pressure sintering, using a commercially avail-able alpha-alumina nanopowder with a purity of 99.
9%,质量分数)、分析纯 Mg(NO3)2为原料,以两面顶压机高压烧结,制备了纯Al2O3陶瓷及微量MgO掺杂的 Al2O3陶瓷,并进行了密度测试与显微结构分析。
2.
The thermal stability of ball milling powder of Fe86Zr5Nb6B3 melt-spinning strip and the influence of high-pressure sintering conditions on phase components and grain size of bulk alloy were investigated by XRD, DSC and TEM.
借助XRD,DSC,TEM等分析手段,研究了Fe86Zr5Nb6B3快淬带球磨粉末的热稳定性以及高压烧结条件对块体合金的相组成和晶粒尺寸的影响。
3.
The influence of spark plasma sintering and high-pressure sintering technique on microstructure and magnetic properties of bulk alloys of MA Fe_~73.
研究了放电等离子烧结和高压烧结工艺条件对MAFe73。
补充资料：高烧
人的体温在39℃以上叫高烧。也叫高热。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条