说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 数学固有函数
1)  mathematical intrinsic function
数学固有函数
2)  intrinsic mode functions
固有模态函数
1.
In order to solve the shift of velocity and displacement obtained by integrating acceleration,the Huang transform is used to obtain the intrinsic mode functions of acceleration.
根据非平稳输入下建立的功率谱与均值反应谱之间的关系,合成基于水工设计反应谱的人工地震波,并对其幅值进行修正,降低了高频区误差作用;为了解决加速度时程积分后的速度、位移时程的零线漂移现象,利用Huang变换得到加速度时程的固有模态函数,由Huang变换方法得到的最低频率固有模态函数分量通常情况下代表原始信号的趋势或均值,对去掉均值后的加速度时程进行积分得到的速度、位移时程不存在零线漂移问题。
2.
First,the mid-signals can be produced by reducing the amplitude of narrow-band interference in frequency region,which is decomposed with EMD,then intrinsic mode functions(IMF) which contain specific frequency can be obtained,then for every IMF,the effective threshold method for suppressing the periodic narrow-band interference is used.
首先在频域处理时设置一个较大阈值来降低窄带干扰幅值,接着EMD以得到含有特征频率的固有模态函数(IMF),然后对IMF分量进行阈值处理,利用窄带干扰和局部放电信号在IMF分量上的特性差异来抑制窄带干扰。
3)  intrinsic mode function
固有模态函数
1.
The gradient magnitude image is decomposed by the empirical mode decomposition technique to obtain a number of intrinsic mode functions that capture the gray level change information under different scale of the image.
对梯度模图像进行经验模态分解,获得表示图像不同尺度下变化信息的固有模态函数,取携带丰富图像特征的前两个固有模态函数进行叠加,对叠加后的固有模态函数求取等高线,以实现对图像特征的提取和表达。
2.
In order to extract the characteristics of partial discharge signals, this paper investigates a new method using empirical mode decomposition (EMD) and intrinsic mode function (IMF) reconstruction for denoising of partial discharge.
为了提取局部放电信号的特征,提出一种基于经验模态分解(EMD)和固有模态函数(IMF)重构算法的局部放电噪声抑制方法。
3.
Gain a set of the intrinsic mode function (IMF) by using EMD to decompose the voltage signals which had been acquired from the power line.
提出了1种结合经验模态分解的独立分量分析方法:首先对采样得到的1路电网电压信号进行经验模态分解,得到1组固有模态函数;通过计算它们的互相关系数,找出独立性最强的几个,接着用独立分量分析的方法处理这几个固有模态函数与原采样到的电压信号,最后得到1组彼此独立的独立分量,从而提取出通信信号。
4)  intrinsic mode function(IMF)
固有模态函数
1.
The EMD method and its adaptive filtering property in the process of obtaining the intrinsic mode function(IMF) were discussed.
讨论了经验模态分解方法及其在获取固有模态函数过程中的自适应滤波特性。
2.
Four intrinsic mode function(IMF)components and one residual component are gained through decomposition on the numerical results of Duffing equation using third-order Runge-Kutta method.
介绍了Hilbert-Huang变换(HHT)这一全新的处理非线性、非平稳信号数据的方法,将其用于分析典型的非线性系统-Duffing方程,通过对使用三阶Runge-Kutta法求解而得到的Duffing方程数值解分解后,得到了4个固有模态函数分量和1个残余量,给出了相应的能量-频率-时间分布图-Hilbert谱,并将其边际谱与Fourier谱作了比较。
3.
Namely the image is disassembled into the Intrinsic Mode Function(IMF) domain,then the feature of each IMF is extracted with Gray Level Co-occurrence Matrix method.
提出了一种新的图像特征提取方法,用二维经验模式分解将图像分解到固有模态函数(Intrinsic Mode Functions,IMF)域,即将图像分解成一系列的IMF和一个残差。
5)  intrinsic mode function
固有模式函数
1.
For the problem that the intrinsic mode functions(IMF) decomposed by the empirical mode decomposition(EMD) in HilbertHuang transform are not orthogonal in mathematical rigor,a new method based on the Gram-Schmidt method is proposed and the complete orthogonal intrinsic mode functions are attained.
针对Hilbert-Huang变换中经验模式分解所得固有模式函数存在的不完全正交问题,基于Gram-Schmidt正交化方法,提出了一种新的正交化处理方法,可得到完全正交的固有模式函数,从而完善了Hilbert-Huang变换方法。
6)  IMF [英][,aɪ em 'ef]  [美]['aɪ 'ɛm 'ɛf]
固有模态函数
1.
The northern-southern record of El Centro seismic wave often used in civil engineering was analyzed by this method to get its instantaneous frequency map,instantaneous energy map and amplitude-frequency-time 3-D distribution by means of decomposing the record into 9 IMF components and 1 residual component.
将该记录分解成9个固有模态函数分量和1个残余量,进而得到相应的瞬时频率图、瞬时能量图和振幅-频率-时间三维分布图谱,并将其边际谱与Fourier谱作了比较。
补充资料:态函数
      由系统状态唯一确定的热力学量,又称为热力学函数。例如温度、内能、......等。应注意两点: "唯一"指的是若给定一个状态,则该热力学量仅取一个数值;反过来,当给定态函数的值时,状态并不被唯一地确定。例如,当给定系统的温度时,其压强和体积可取多组数值。②热力学系统状态参量与态函数间没有严格的界限。对于均匀系,若以压强p、体积V描述状态时,则温度T为态函数,若取T、V为参量时,则p为态函数。
  
  在热力学中,基本的态函数为温度T、内能U和熵S。由它们可构造出许多辅助态函数,常用的有:焓H、自由能F、吉布斯函数G和巨热力势Ω ,由此形成的热力学函数方法是热力学理论中非常有用的一种工具。
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条