1) solid lubrication system
固体润滑体系
1.
In this article,fullerene and carbon nanotubes modified lubricating systems like fluid lubrication systems,solid lubrication systems (solid films,carbon-based lubrication systems,polymer-based lubrication systems,metal-based lubrication systems,ceramic-based lubrication systems) are introduced.
综述了富勒烯和碳纳米管改善流体润滑体系、固体润滑体系(固体膜、碳基、聚合物基、金属基、陶瓷基润滑体系)摩擦性能的研究进展。
2) solid lubrication
固体润滑
1.
Application study on solid lubrication in a dry scroll vacuum pump;
涡旋真空泵中固体润滑技术的应用研究
2.
The nickel-based solid lubrication coatings containing nickel coated graphite were produced on the 45 steel substrate by high velocity oxygen fuel spraying.
用超音速火焰喷涂在45钢表面制备具有Ni包石墨的镍基固体润滑涂层。
3.
Four types of solid lubrication coatings containing MoS_2 were sprayed on the steel substrate by high velocity oxygen fuel(HVOF) spraying.
采用超音速火焰(HVOF)喷涂的方法在45钢表面制备四种含有MoS2的镍基固体润滑涂层,并研究了MoS2含量对涂层组织和性能的影响。
3) solid lubricating
固体润滑
1.
Compared with TiN/40CrNiMo, the hardness and solid lubricating effects for TiN/GT35 were more significant.
同TiN/40CrNiMo相比,TiN/GT35的硬度高和固体润滑效果显著,GT35是较为理想的基体材料。
2.
The surface of the copperized carbon fiber was analyzed by scanning electron microscopy(SEM)and X-ray diffraction(XRD),the friction and wear properties were studied by adding the prepared copperized carbon fiber to PTFE to form solid lubricating composite materials.
在镀铜碳纤维中加入PTFE制备固体润滑复合材料,并进行摩擦磨损实验。
4) solid lubricant
固体润滑
1.
Phosphate treatment has a great influence on bonded solid lubricant coating.
把氧化锌、磷酸、水按照不同比例配成磷化液,对金属表面进行不同参数(温度、时间)的磷化处理,并在其表面煮涂MoS2利用M-2摩擦磨损实验机测定不同磷化工艺下的MoS2涂层的磨擦学性能,确定了使MoS2固体润滑涂层摩擦性能达到最佳的磷化工艺参数,并讨论了磷化膜表面粗糙度对固体润滑涂层摩擦学性能的影响。
2.
Rheological behavior of a thermal resistant bismaleimide resin for solid lubricant composite was studied.
研究了一种可用于固体润滑的耐高温双马来酰亚胺树脂的流变特性,并根据双阿罗尼乌斯方程,建立了与实验数据较为相符的化学流变模型,同时对树脂粘度进行了预测。
3.
For the analysis technology of the contact problem for the friction pair with solid lubricant,the traditional differential method need to deal with the border iterative,and the computational process is time-consuming and difficult to balance.
固体润滑摩擦副接触问题数值分析的传统的微分法涉及边界迭代,计算过程冗长且不易收敛。
5) solid lubricant
固体润滑剂
1.
Mechanical properties and microstructure of Al_2O_3/TiC ceramics with the addition of solid lubricants;
添加固体润滑剂的Al_2O_3/TiC陶瓷材料力学性能和显微结构
2.
A solid lubricant OCL-RH for drilling fluid.;
钻井液用固体润滑剂OCL-RH的研制
3.
A kind of new anti-friction abrasion resistant coating is prepared with methyl methacrylate homopolymer as binder, MoS2 as solid lubricant, butadiene acrylonitrile rubber (BNR)/ acrylonitrile-butadiene-styrene (ABS) resin as flexibilizer, and other additives.
采用甲基丙烯酸甲酯均聚物为成膜物,以二硫化钼(MoS2)、丁腈橡胶/ABS树脂为固体润滑剂和增韧弹性体,加入其他助剂,获得一种新型的减阻耐磨涂料,并对其磨损机理进行了初步的探讨。
6) solid self-lubricating
固体自润滑
1.
Investigation on high temperature oxidation kinetics of Ni-Cu-C solid self-lubricating alloy;
Ni-Cu-C固体自润滑合金的高温氧化动力学研究
2.
A new Fe-Mn-C-Si solid self-lubricating alloy with high wear resistance was designed and was prepared by melting method.
在高锰耐磨钢成分基础上引入石墨,通过熔炼法制备出新型高耐磨Fe-Mn-C-Si固体自润滑合金。
补充资料：采用高分子固体润滑剂加工冷拉的金属制品
采用高分子固体润滑剂加工冷拉的金属制品
采用高分子固体滤肯利加工j引j的垒甚制品 R瑚舛{段j。学高分于研：￡所供稿
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条