1)  amorphous silicon film
非晶硅膜
1.
It is shown that, for non scanning mode, the dehydrogenation treatment before crystallization can make the crystallized film have higher crystallinity, that is, the role of hydrogen is to hinder the crystallization of amorphous silicon film.
采用 Xe Cl准分子激光器对 PECVD法生长的非晶硅膜进行了诱导晶化处理 。
2)  noncrystalline silicon film modified column
非晶硅膜改性柱
3)  amorphous
非晶
1.
Influence of annealing condition on the stress impedance of Fe-based amorphous alloy ribbons;
退火条件对铁基非晶薄带压应力阻抗效应的影响
2.
Influence of rare earths on Fe-based amorphous composite coatings by laser cladding;
稀土RE对激光熔覆Fe基非晶复合涂层的影响
3.
Microscopic study of formation and mechanical properties of amorphous Cu;
非晶Cu形成过程及其力学性能的微观机理研究
4)  amorphous phase
非晶
1.
Amorphous Phase and Its Formation Mechanisms in Diffusion Layer of Rare Earth Aluminized Steel;
渗铝稀土钢扩散层的非晶态相及其形成机理
2.
The quantification of amorphous phase can not be obtained by Rietveld.
说明了非晶相不能用Rietveld方法来定量的原因。
3.
The amorphous phase is found in the outer layer of hot-dip aluminized layer.
结果发现,镀铝层的表面层存在非晶态金属相。
5)  amorphous alloy
非晶
1.
Study review of amorphous alloy by mechanical alloying;
非晶态合金的机械合金化研究述评
2.
5(wt-%) amorphous alloys with high strength, low density and large Young's modulus were prepared by liquid quenching on a single roller melt-spinning apparatus.
利用单辊快速凝固装置制备出高强度、低密度、大楼量的非晶态Ａｌ６１Ｌｉ２。
3.
The amorphous alloy s strips showd un-uniformity of silicon niobium components at the surface and uniformity in thickness.
5B9非晶带材,并对带材进行了成分和金相分析。
6)  amorphous structure
非晶
1.
Highfrequency plasma and laser supported combustion wave induced by it are the main reasons for amorphous structure of ultrafine Co powder.
采用激光 -感应复合加热蒸发法 ,在不同的工艺下分别制备了非晶结构与面心立方结构的纳米钴粉 。
2.
The SEM and TEM observation revealed that there were amorphous structures in the laser cladding.
利用５ｋＷＣＯ２激光器激光熔覆铝合金表面的Ｎｉ－Ｃｒ－Ａｌ涂层，ＳＥＭ与ＴＥＭ分析结果表明，在激光熔覆层中存在有非晶组织，非晶组织呈空间扭曲薄片或杉叶状，它们分别存在于熔覆层颗粒间白色网状组织与颗粒
3.
The observation of SEM and TEM revealed that there are amorphous structures in the laser cladding.
利用5kWCO2激光器激光熔覆Al合金表面的Ni－Cr－Al涂层，SEM与TEM分析结果表明，在激光熔覆层中的非晶组织呈空间扭曲薄片或杉叶状，它们分别存在于熔覆层颗粒间白色网状组织与颗粒中,利用差热分析（DTA）半定量测定熔覆层中的非晶含量，功率密度，扫描速度对非晶含量有较大的影
参考词条
补充资料：非晶硅太阳能电池材料
分子式：
CAS号：

性质： 原子排列短程有序而长程无序的硅材料。只有能隙中定域密度小于1016～1017eV的非晶硅才可作太阳能电池。具有较高的光吸收系数，但光电性有退化现象。用于制作毫瓦级、非阳光直接曝晒的场合，如手表、计算器等的电池。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。