1) gel-casting
凝胶浇铸法
1.
Hydroxyapatite/polylactic-co-glycolic acid(HA/PLGA)composites are prepared by gel-casting.
采用凝胶浇铸法,将PLGA-HA凝胶与多孔HA中间层复合。
2.
Hydroxyapatite/poly lactic-co-glycolic acid(HA/PLGA)and PLGA-HA-TiO_2 composites were prepared by gel-casting and cold pressing-solidifying,respectively.
采用添加造孔剂法制备出骨组织工程用多孔羟基磷灰石(HA)中间层,研究了造孔剂种类、含量、温度等因素对孔径、孔隙率、力学性能的影响:应用凝胶浇铸法制备出HA-PLGA复合材料,研究了其制备工艺及其弹性模量:通过冷压与固化技术制备出HA-PLGA-TiO_2复合材料,评价了该复合材料的生物相容性。
2) gel-casting
凝胶浇注法
1.
Sm and Gd co-doped CeO2 (SGC) powders were prepared by the gel-casting method.
通过凝胶浇注法制备了Sm,Gd共同掺杂的CeO2(SGC)粉末,将制得的粉末经1400℃高温烧结4h得到相应的SGC电解质烧结体,并对SGC粉末及相应的烧结体的性能进行了表征。
2.
9(TiO2-SDC) powder was prepared from the corresponding nitrates and oxides by a gel-casting method.
以硝酸盐和氧化物为原料,通过凝胶浇注法制得了摩尔分数为10%TiO2-Ce0。
3.
5xSmxTiO3 powders were prepared by gel-casting process.
采用凝胶浇注法制得了Sr1-1。
3) coagulant casting process
凝固(剂)浇铸法
4) gelcasting
凝胶浇注
1.
The forming processes of gelcasting,the microstructure of green bodies and the properties of zirconia ceramics were studied.
主要研究了氧化锆陶瓷的凝胶浇注成型工艺,以及坯体的微观结构和烧成后陶瓷的力学性能,并讨论获得高性能的原因。
2.
2)O_(2-y),TSDC)powders doped with 0～15% mol percents of TiO_2 were prepared by the gelcasting process.
通过凝胶浇注法制备了 TiO_2掺杂量为0～15% (摩尔分数)的 TiO_2-Ce_(0。
5) gel-casting
凝胶浇注
1.
The green bodies of carbon nanotubes/hydroxyapatite(CNTs/HA) composite were prepared by gel-casting process.
采用凝胶浇注成型工艺制备了纳米碳管/羟基磷灰石复合材料坯体。
2.
9)(DCO) powders were prepared by a modified gel-casting process withorganism aided.
以硝酸盐为原料,采用有机物辅助的水基凝胶浇注(Gel-casting)工艺合成出了Gd_(0。
补充资料：Sds-聚丙烯酰胺凝胶电泳凝胶电泳
sds-聚丙烯酰胺凝胶电泳（sds-page，sodium dodecyl sulfate-polyacrylamide gel electrohoresis）
在有去污剂十二烷基硫酸钠存在下的聚丙烯酰胺凝胶电泳。sds-page只是按照分子大小分离的，而不是根据分子所带的电荷和大小分离的。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条