1) equivalent plate thickness
等效平板厚度
1.
With the concept of equivalent plate thickness, we calculated the periodic electric field in a chain and the periodic charger in the plate surfaces.
基于电导方法和等效平板厚度概念建立了非极性液体中单链颗粒间相互作用的模型，考虑了链上多粒子的作用，用线性叠加的方法得到了链中粒子所受的总的吸引力，并据此预测了准静态屈服应力，和实测值有较好吻
2) equivalent thickness
等效厚度
1.
To study the equivalent thickness,and effects of superposition throttle slices to damper characteristics,the bending deformation is analyzed at the throttle mouth radius r_k,and the equivalent thickness formula deduced.
为了探究减振器叠加阀片等效厚度、设计方法及其对减振器特性的影响,对节流阀片在阀口位置的弯曲变形量和叠加阀片等效厚度进行了研究,给出了等效厚度计算公式。
2.
An equivalent thickness conception is proposed to consider the crack closure effects and the three-dimensional stress constraints along the crack front by use of the theory obtained for the straight through thickness crack.
提出了等效厚度的概念,利用穿透直裂纹的研究结果,考虑表面裂纹扩展中塑性致闭和三维应力约束效应。
3.
Through finite element analysis on point-supported midhollow glass with various thicknesses,the value of equivalent thickness of mid-hollow glass given in Technical Specification for Point Supported Glass Curtain Wall is revised and corresponding revised coefficient is given.
在试验的基础上,通过对不同厚度点支式中空玻璃的有限元分析,对现行的《点支式玻璃幕墙工程技术规程》(CECS127:2001)关于中空玻璃等效厚度取值进行了修正,给出了修正系数,同时也给出了点支式中空玻璃最大应力和最大位移的建议计算公式。
3) effective thickness
等效厚度
1.
The coefficient ξ of shear force ratio is made in equation about laminated glass effective thickness.
计算夹层玻璃等效厚度时引入了剪力比系数ξ,即同样载荷条件下,夹层玻璃层间应力与同样尺寸、厚度的单片玻璃中性层最大剪应力之间的比值。
2.
The effective thickness and deflection of laminated glass with different interlayer thickness and fixed glass thickness were analyzed using uniform pressure tests.
采用负压加载的方法,研究了在均布载荷下夹层玻璃板等效厚度和挠度随中间层胶片厚度变化的规律,夹层玻璃结构为两片1000mm×1000mm厚度5mm的单片玻璃,中间层为一定厚度的胶片。
4) equivalent thickness of glued double glass floors
夹胶玻璃楼板等效厚度
5) equivalent plate thickness method
等效板厚法
1.
On the basis of Cangkou Navigational Cable-Stayed Bridge located at Qingdao Bay,a simplified calculation method which is named the equivalent plate thickness method is adopted to analyze the mechanical behavior of anchorage zone under the most unfavorable cable load in general working condition and broken cable condition and under the biggest compression stress in top web of steel box girder.
以青岛海湾大桥稀索斜拉桥为工程背景,采用简化计算方法(等效板厚法),应用程序ANSYS,建立板壳单元有限元计算模型,分别对普通工况和断索工况下斜拉索索力最大,钢箱梁截面顶板压应力最大的工况下,锚固区域的受力性能进行了研究。
2.
Non-linear finite element analyses of steel anchor box used in cable-girder anchorage zone,steel anchor box,for Cangkou Navigational Bridge of Qingdao Bay Bridge are carried out by two different methods which are equivalent plate thickness method and non-liner contact element method.
采用非线性接触单元法和简化的等效板厚法两种不同的建模方法,对青岛海湾大桥沧口航道桥索梁锚固结构———钢锚箱进行三维非线性有限元仿真分析,将计算结果进行比较,验证了非线性接触单元法的计算模型能够较真实地反映锚箱锚垫板与承压板之间不焊接,但紧密压贴的关系。
6) equivalent panel
等效平板
1.
In this paper mechanics properties and dielectric properties of EZK/BMI and quartz fabric/ BMI composites,anti-large power and transmission of Ku band of equivalent panels were investigated.
研究了 EZK 织物/双马树脂和石英织物/双马树脂复合材料的力学性能和介电性能及等效平板在 Ku 波段的透波和耐功率性能。
补充资料：等效厚度法
分子式：
CAS号：
性质：为克服带电粒子核反应中截面随粒子入射距离而变这一困难而提出的一种刻度方法。等效厚度是一个虚构的物理量，它规定在这个厚度内反应产物放射性分布均匀。可用绘制活化曲线定出等效厚度。也可用相对法给出。
CAS号：
性质：为克服带电粒子核反应中截面随粒子入射距离而变这一困难而提出的一种刻度方法。等效厚度是一个虚构的物理量，它规定在这个厚度内反应产物放射性分布均匀。可用绘制活化曲线定出等效厚度。也可用相对法给出。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条