1) striking
[英]['straɪkɪŋ] [美]['straɪkɪŋ]
预镀(冲镀)
2) pre-plating
预镀
1.
Influence of pre-plating processes on the surface quality of hot-dip Galfan alloy deposits on steel wire;
预镀工艺对钢丝热镀Galfan合金镀层表面质量的影响
2.
Meanwhile, determined effect of the composition in pre-plating bath on tin coating thickness, surface microtopography and coating binding power throught single factor experiment of pre-plating solution.
同时通过对预镀液的单因素实验,确定了加入预镀的化学镀锡工艺各种成分对厚度、表面型貌以及镀层结合力的影响。
3) pre-coating
预镀
1.
To analyze and compare each targets of pre-coating Cu and pre-coating Ni,which are the two pre-coating methods adopted in electrocoating Cu for Cu-cladded steel wireThe relative matters needing attention and measures of improvement are put forward,which have important significances for cutting down production cost and improving product qualit
对铜包钢丝在电镀铜过程中采用的两种预镀方法———预镀铜和预镀镍的各项指标进行分析比较，提出相应的注意事项和改进措施，对于降低生产成本，提高产品质量意义甚大。
2.
To introduce a new pre-coating copper process without cyanogens for production of copper clad steel wire.
介绍在铜包钢丝生产中应用的一种新型的无氰预镀铜工艺,详尽叙述该工艺的工艺流程、工艺规范及操作注意事项,在铜包钢丝生产中应用该项无氰预镀铜新工艺具有显著的经济效益和环境效益,值得进一步推广。
4) plating
[英]['pleɪtɪŋ] [美]['pletɪŋ]
镀
1.
The deposition parameters, structures and element distribution of electroless Ni-Mo-P deposits, which were obtained from plating baths containing tartrate-lactic acid as complexing agent, were studied.
对自酒石酸盐-乳酸为络合剂体系的镀液中制得的Ni-Mo-P合金镀层的参数、结构及元素分布进行了研究。
2.
In view of the traditional making technology of smooth limit gauge,a method of plating surface is put forward.
针对光滑极限量规传统的制造工艺,提出了表面镀层的方法,分析了工艺过程,通过 试制,达到了一定的效果。
5) pulse plating
脉冲电镀
1.
General development situation of pulse plating in recent years;
近年来脉冲电镀发展概况
2.
Effect of addictive in copper interconnect in pulse plating;
添加剂对铜互连线脉冲电镀的影响
3.
Influence of Na_2WO_4 and NaH_2PO_2 concentrations on microstructures and properties of CeO_2-SiO_2/Ni-W-P nano-composite films prepared by pulse plating;
钨酸钠和次磷酸钠浓度对脉冲电镀CeO_2-SiO_2/Ni-W-P纳米复合薄膜组织及性能的影响
6) pulse electroplating
脉冲电镀
1.
Study on micro-hardness of Ni-Co alloy prepared by high-frequency pulse electroplating;
高频脉冲电镀镍钴合金的显微硬度研究
2.
Process of non-cyanide gold pulse electroplating and its application to cavum target;
无氰脉冲电镀金工艺及其在空腔靶中的应用
3.
Influential factors of Ni-SiC nano-composite coatings by high frequency pulse electroplating;
高频脉冲电镀Ni-SiC纳米复合镀层影响因素的研究
补充资料：预镀镍
分子式：
分子量：
CAS号：
性质：又称闪镀镍。即基底（工件）材料为不锈钢或高强度钢，直接电镀接合力差，为提高镀层结合力，以改善镀层质量，经镀前处理净化后的工件，必须先进行预镀镍后再电镀（镀铜、镀银、镀镉、镀锌等）。预镀镍溶液成分为氧化镍和盐酸。
分子量：
CAS号：
性质：又称闪镀镍。即基底（工件）材料为不锈钢或高强度钢，直接电镀接合力差，为提高镀层结合力，以改善镀层质量，经镀前处理净化后的工件，必须先进行预镀镍后再电镀（镀铜、镀银、镀镉、镀锌等）。预镀镍溶液成分为氧化镍和盐酸。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条