1) in situ crosslinked hydrogel
原位固化凝胶
2) original position solidification
原位凝固
1.
The results showed that the pore diameter distribution of the green body made by original position solidification method was more uniform and the shape was more regular than that made by dry pressing and dip casting.
研究发现:用原位凝固工艺获得的素坯比用干压和注浆成型的素坯孔径分布更加均匀、具有单峰性,孔洞形状规则。
2.
The result showed that the pore diameter distribution of the original position solidification green body was more well than dry pressing and dip casting and the distribution peak was only one, moreover, the shape of pore was more regular.
研究发现 ,用原位凝固工艺获得的素坯比用干压和注浆成型的素坯孔径分布更加均匀 ,具有单峰性 ,孔洞形状规则。
3) in-situ colloidal forming process
原位凝固胶态成型工艺
1.
The less viscous dense alumina suspensions were obtained for the effective application in the in-situ colloidal forming process.
制备了低粘度、高固相含量氧化铝悬浮浆料,并将其有效地应用于原位凝固胶态成型工艺中。
5) in situ gel
原位凝胶
1.
Application of polymers in temperature-sensitive in situ gels;
聚合物在温度敏感型原位凝胶中的应用
2.
Advances of pH-sensitive in situ gels research;
pH敏感型原位凝胶的研究进展
3.
Preparation and stability studies of huperzine A nasal in situ gel spray;
石杉碱甲鼻用原位凝胶喷雾剂的制备及稳定性研究
6) situ-gel
原位-凝胶
补充资料：原位
分子式：
CAS号：
性质：源于拉丁语。指在原来的，正常、自然的部位或位置。
CAS号：
性质：源于拉丁语。指在原来的，正常、自然的部位或位置。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条