说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 直流-示差脉冲电沉积
1)  gavanostatic-differential pulse electrodeposition
直流-示差脉冲电沉积
2)  pulse current(PC) deposition
脉冲电流(PC)沉积
1.
PtRu catalysts were prepared by pulse current(PC) deposition in Pt and Ru metal precursor mixed solution,the optimum pulse current density Jp=2.
在Pt、Ru金属前驱体混合溶液中,采用脉冲电流(PC)沉积制备PtRu催化剂,最佳脉冲电流密度Jp=2。
3)  pulse electrodeposition
脉冲电沉积
1.
Process of pulse electrodeposition of nanocrystalline Ni-Cr alloy from trivalent chromium bath;
三价铬脉冲电沉积纳米晶Ni-Cr合金工艺
2.
Pt-Ru-La/C electrocatalyst for DMFC prepared by pulse electrodeposition;
脉冲电沉积法制备DMFC用Pt-Ru-La/C电催化剂
3.
Cobalt/platinum multilayer prepared by pulse electrodeposition in a single cell and its characterization;
单槽脉冲电沉积制备钴/铂多层膜及其性能表征
4)  electro-pulse deposition
电脉冲沉积
1.
High temperature corrosion behavior of microcrystalline aluminide coatings by electro-pulse deposition;
电脉冲沉积铝化物微晶涂层的高温腐蚀行为
5)  pulse current electrodeposition
脉冲电沉积
1.
A nanostructured nickel alloy and a Ni/Si3N4(w) composite were fabricated by pulse current electrodeposition,and their superplastic tensile deformation behaviors were investigated at strain rates ranging from 1×10?3 to 2×10?2 s?1 and temperatures ranging from 673 to 823 K.
采用脉冲电沉积技术制备纳米镍合金及Ni/Si3N4(w)复合材料,在应变速率为1×10-3~2×10-2 s-1,温度为673~823 K的条件下,研究它们的超塑性拉伸变形行为,确定最佳超塑性条件并获得最大伸长率。
6)  pulse plating
脉冲电沉积
1.
Based on study on the influence of solution composition and pulse parameters, namely, pulse on-time, off-time and peak current density on deposition layer in the pulse plating process, desirable diamond tools are easily obtained by using the alternating pulse deposition.
课题主要研究了脉冲电沉积法制备纳米镍钴材料的制备工艺及所制备材料的性能,并对该技术如何应用在金刚石工具进行了研究。
2.
,metal Cu nanocrystalline layers were plated on the surface of metal substrates by pulse plating,then the Cu nanocrystalline layers were used to synthesize CuO nanoneedles by thermal oxidation method at 700℃ in the air.
采用脉冲电沉积技术在金属 Cu 基板表面电沉积纳米晶 Cu 薄膜,在空气中采用热氧化法制备出一维金属 CuO 纳米针材料。
补充资料:直流


直流
Direct current

  直流(direet。urrent) ,仅按一个方向流过电路或设备的电流称为直流。与交流电压相比,直流电压的极性是不变的。直流电流相当于电荷沿着闭合的电路以不变的方向流动或位移。直流电流和电压的幅值可以恒定,也可以随时间变化。 蓄电池和旋转发电机产生幅值恒定的额定直流电压,整流器产生幅值随时间而变的直流电压。整流器把交流电压变换为脉动的直流电压。 通常电站不是广泛地将直流电输配给一般用户,相反,在需要直流电(d。)能的场所,是把商业上合用的交流电(ac)能整流为直流电能。 「罗布(D.D.Robb)撰]
  
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条