1) orienting compression
取向成型
1.
As an important procedure for sintered and bonded magnets, orienting compression has direct influence on the property of the magnet.
取向成型是烧结和粘结磁体的一道重要工序,对最终磁体的性能有直接影响。
2) oriented moulding
取向模压成型
1.
The rods made of poly (l-lactic acid) (PLLA) and poly (dl-lactic acid) (PDLLA) were processed by oriented moulding.
以取向模压成型制备了聚l -乳酸、聚dl -乳酸骨折内固定棒 (Φ =3 。
3) shear controlled orientation injection moulding
剪切控制取向注射成型
1.
The principles of the shear controlled orientation injection moulding (SCORIM) and the conventional injection moulding (CIM) are compared.
对比了剪切控制取向注射成型(SCORIM)与普通注射成型(CIM)的基本原理。
4) orientation mapping
取向成像
1.
Analysis on behavior of dynamic recrystallization in magnesium alloy AZ31 by orientation mapping;
镁合金AZ31动态再结晶行为的取向成像分析
2.
The textural features during ferrite refinement by deformation enhanced transformation were analyzed by means of orientation mapping based on the EBSD technique in a Q235 low carbon steel.
利用背散射电子衍射取向成像技术分析了在热模拟单向压缩条件下Q235碳素钢形变强化相变时铁素体织构的类型。
3.
The texture evolution of ferrite during warm compression of Q235 low carbon steel was determined quantitatively by means of orientation mapping based on the EBSD technique.
利用背散射电子衍射取向成像技术定量分析了热模拟单向压缩条件下Q235碳素钢热变形时铁素体的织构形成规律。
5) achievement orientation
成就取向
1.
The achievement orientation of managers at different levels was studied by structural interview and behavioral event interview.
通过结构化访谈、行为事件访谈等方法 ,较为全面、深入地考察了企业各层次经理人员的成就取向及特点。
补充资料：刨花模压成型家具
刨花模压成型家具 大连家具研究所研制成的刨花模压成型家具。其以刨花为主料，采用刨花模压和表面贴面同时进行的一次成型工艺，制成不同单箱体。各单箱体又可按搭积木方法，拼装成各种款式的家具。其原料成分配比为：脲醛胶：13%；防水剂（20%）：0.4%；固化剂（20%）：0.4%；尿素（20%）：0.4%；刨花：85.8%。在脲醛树脂胶中，树脂含量58±2%，甲醛2.5%。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条