1) high-gloss surface part injection technology
高光注射成型
1.
Using a front panel of LCD television as a model system, the high-gloss surface part injection technology was studied using Taguchi method combined with finite element (FE) analysis and data processing.
以LCD电视机前面壳为例,以高光注射成型制品主要表观品质因素(翘曲变形、沉降指数和体积收缩率)为成型性能指标,利用田口实验法、数值模拟及数据处理技术,对高光注射成型工艺特性进行了研究。
2) high fineness and no-weldlines injection moulding
高光无痕注射成型
1.
A high fineness and no-weldlines injection moulding system was developed.
介绍了研制的高光无痕注射成型系统及具有随形介质通路的模具结构、快速加热与冷却装置和温度测控装置的工作原理,重点分析了定模模芯中高光面壳与背板的结构、加热与冷却装置中热冷介质的4种循环路线及切换方法。
4) injection molding
注射成型
1.
An integrated simulation of residual stress and warpage for plastic injection molding;
塑料注射成型应力与翘曲的集成模拟
2.
Influence of processing parameters in injection molding on replication fidelity of microstructure parts;
注射成型工艺参数对微结构零件复制度的影响
3.
Evaluation of Hesitation Based on CAE for Plastic Injection Molding;
基于CAE场量的塑料注射成型滞流缺陷评价
5) injection
[英][ɪn'dʒekʃn] [美][ɪn'dʒɛkʃən]
注射成型
1.
Secondly,the injection of solid tire and three structures for injection was studied.
探讨了实芯轮胎生产方法,阐述了传统模压法、缠绕法和离心浇注法的工作原理及其优缺点,研究了实芯轮胎的注射成型及3种注射型轮胎结构,并对未来发展趋势进行了展望。
2.
A turning injection mould is proposed for forming the kind of parts.
阐述了深腔塑件注射成型时可能采取的工艺方案,同时对每种方案进行了分析和比较,提出了采用转动式注射模成型该类零件的模具结构,并对模具结构进行了介绍。
3.
Through the study of the injection mould for the plastic conduit,the problems on design of multi_cavity injection moulds for deep_cavity plastic parts were solved.
通过对导管塑件注射成型模具的研究和探讨 ,解决了深腔塑件的多型腔注射模具设计问
6) injection moulding
注射成型
1.
Application of Taguchi DOE in optimization of processing parameters of injection moulding;
Taguchi试验设计在注射成型工艺参数优化中的应用
2.
Precise injection moulding of advanced ceramics;
先进陶瓷的精密注射成型
3.
The shrinkage of injection moulding and mould dimension;
注射成型收缩与模具尺寸
补充资料：高光
1.汉宫殿名。 2.汉高祖和汉光武帝的并称。 3.极为明亮的光。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条