1) loading condition
加载条件
1.
Ekonol/POM and Ekonol/G/MoS2/POM composite was prepared by blending-compressing method with torque rheometer,and the friction and wear experiment was used to investigate the tribology characteristics of the POM composite under different loading condition.
用摩擦磨损试验对转矩流变仪-模压成型方法制备的Ekonol/POM和Ekonol/G/MoS2/POM复合材料在不同加载条件下的摩擦学性能进行了研究。
2.
Dynamic modulus(E*) tests are performed on various void volume samples under the conditions of various temperatures and various loading frequencies,which are obtained from asphalt mixtures with Superpave gradation,and the changing regularity of dynamic modulus of asphalt mixtures with the volume parameters and loading condition is analyzed.
对一种Superpave级配沥青混合料不同空隙率的试样进行了不同温度、不同加载频率条件下动态模量试验,分析了混合料动态模量随体积参数、加载条件的变化规律,研究结果对我国的路面设计模量动态参数的选择具有借鉴意义。
3.
The relationships among specimen stress,incident stress,reflected stress and transmitted stress were analyzed;and the loading condition for specimen deformation at constant strain rate was found out,i.
从分析霍布金逊压杆测试中试样变形应力、入射应力、反射应力和透射应力的相互关系入手,获得满足试样恒应变率变形所需的加载条件,即只有当加载应力和试样的变形应力具有相同的变化规律时,试样变形才处于恒应变率状态。
2) loading-unloading-reloading condition
加载–卸载–再加载条件
1.
A bilinear strain hardening model was proposed based on the results from the static triaxial tests under loading-unloading-reloading conditions.
根据我国杭州市城市固体废弃物(MSW)的组成,在室内人工配置了MSW试样,采用静三轴CD试验研究了不同组成MSW在加载–卸载–再加载条件下的变形及强度特性。
3) local loading conditions
局部加载条件
4) boundary loading condition
加载边界条件
5) condition of stop loading
终止加载条件
1.
The condition of stop loading and the standard of determining pile s ultimate bearing ability have been discussed in the paper.
根据现行单桩竖向静载试验几本主要规范 ,对终止加载条件、极限承载力判断标准两方面进行了讨论 ,并就实际检测工作中如何选用规范提出了自己的看法。
6) General loading condition
普通加载条件
补充资料：自动加载下载的*.dmt材质方法
自动加载下载的*.dmt材质方法一
1、建立如下路径的文件夹：
E:\graphiclib\graphic-library\
然后把你下载的adv_materials文件夹（里面材质了）放到刚才建立的路径里，变成如下路径
E:\graphiclib\graphic-library\adv_materials
2、如图配制搜索路径
3、这样调用！点PHOTOLUX材质库
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条